Troubleshooting
HOME INSTRUCTION 2 INSTRUCTION 3 INSTRUCTION 4 TROUBLESHOOTING
To fix the wording or
text on your projection from being backward, use the following picture.
Lay the TV on it's back, so the screen faces
the ceiling. With the projector attached to your TV, it will project to the
ceiling in this position. Now, take a mirror at a 45 degree angle and attach it
to the front of your projector box like in the above picture. This will then
redirect the projection onto your wall with the text properly displayed.
To Improve Picture
Quality:
Good results may be obtained by using a white
sheet, a light colored wall, or even a shower curtain. But for best results we
recommend you use a Silver Finished Screen made only for projected TV images.
This will give you up to 6 - times brighter pictures than any other screen or
material. No hot spots. No blurry edges. Can be viewed in partially lighted
rooms. HOW TO MAKE YOUR OWN PROJECTOR SCREEN. Simply buy from
your local paint store (for about $2.00) a Spray can of either No. 1246 Testors
Enamel in Metallic Silver, or No. 1401 Krylon Bright Silver enamel. Spray
lightly several coats on wall, ceiling, plywood, wallboard, cardboard, etc. Let
dry, and make more applications until a thick and smooth even coat of silver is
deposited. This will give you a professional viewing screen that will greatly
improve your projected TV image.
Blurry edges? Try sandwiching the lens in between two panels of flat glass. This will insure the lens is completely flat and thus project a better picture!
Don't Want to Turn
your TV upside down?
Would you rather not turn your TV upside down? Then try
this simple method. It's called Tube Yoke Flipping. Simply find a plug
with 4 wires (red - blue<horizontal lines> and yellow -
green<vertical lines>) and switch the red with the blue/blue with red and yellow
with green/green with yellow. Use the picture below for help when asking your
local TV repairman to complete this for you.It takes five minutes and you do not have to have any technical experience to do this! Never opened a TV before? Don't worry! Try this, it's soooo simple and will not damage your TV.
DO NOT OPEN
YOUR TV YOURSELF!!! HAVE A TRAINED TV PROFESSIONAL DO THIS FOR YOU!!! TV'S STORE
ENERGY EVEN WHEN UNPLUGGED AND YOU CAN BE SEVERELY ELECTROCUTED IF YOU TOUCH THE
WRONG THING!!! TAKE YOUR TV TO YOUR LOCAL TV REPAIR SHOP AND THEY CAN COMPLETE
THIS FOR YOU FOR ONLY A FEW $$.
AGAIN WE
RECOMMEND YOU NOT OPEN YOUR TV YOURSELF! DO NOT TRY IT! IF YOU DO, IT IS AT YOUR
OWN RISK!
Color Problems When
you Turn your TV Upside Down?
When you flip your TV upside down,
do you get some discoloration? Try this method to fix any discoloration...
-
Turn your TV upside down.
-
Turn it on and verify the colors are wrong.
-
Turn your TV off, but leave it plugged in.
-
Leave your TV off but still plugged in for ATLEAST 30 minutes.
-
Turn your TV back on. The colors should be fixed.
(MAKE SURE YOU LEAVE YOUR TV PLUGGED
IN THE WHOLE TIME WHILE DOING THIS.)